Jeanoko Motor Sensor 0.5N.M Max 71% OFF DYN-200 Display For OLED for Torsion $378 Jeanoko Motor Sensor 0.5N.M DYN-200 OLED Display for Torsion For Industrial Scientific Test, Measure Inspect Pressure Vacuum $378 Jeanoko Motor Sensor 0.5N.M DYN-200 OLED Display for Torsion For Industrial Scientific Test, Measure Inspect Pressure Vacuum $378,Sensor,OLED,Motor,www.gimnesia.net,/modernization1441843.html,Torsion,DYN-200,for,0.5N.M,For,Industrial Scientific , Test, Measure Inspect , Pressure Vacuum,Jeanoko,Display Jeanoko Motor Sensor 0.5N.M Max 71% OFF DYN-200 Display For OLED for Torsion $378,Sensor,OLED,Motor,www.gimnesia.net,/modernization1441843.html,Torsion,DYN-200,for,0.5N.M,For,Industrial Scientific , Test, Measure Inspect , Pressure Vacuum,Jeanoko,Display

Jeanoko Motor Sensor 0.5N.M Max Excellence 71% OFF DYN-200 Display For OLED for Torsion

Jeanoko Motor Sensor 0.5N.M DYN-200 OLED Display for Torsion For

$378

Jeanoko Motor Sensor 0.5N.M DYN-200 OLED Display for Torsion For

|||

Product description

Feature:

1. Can display the current measured torsion value and speed value in real time
2. The current power value can be calculated directly, allowing the sensor to be overloaded by 200%
3. Support RS485 communication and active upload protocol, the communication rate can reach 500 times per second
4. This sensor supports simultaneous output of transmission current and transmission voltage
5. The sensor comes with OLED display, the resolution is 128 x 64
6. Can perform simple calibration, clearing, filtering and other operations
7. The accuracy achieves more than 1/1000 accuracy, excellent 0 point stability
8. Non-contact, no maintenance, no wearing parts and long service life


Spec:

Item Type: Sensor
Rated Capacity: ± 0.5N.m
Power Input: DC24V
Current Consumption: Below 150mA
Torsion Output: ± 5VDC; 0-10V; 4-20mA
Speed Output: 60 pulses / rev
Response Performance: 1kHz
Load Resistance: 2kΩ or more
Signal Delay: 0.6ms (50% response)
Allow Overload: 200% FS
Operating Temperature Range: -10 ~ + 50℃
Non-Linearity: 0.1% FS
Repeatability: 0.03% FS
Lag: 0.03%
Temperature Effect of 0 Point: 0.01% FS / C
Temperature Effect of Output: 0.01% FS / C
Rated Speed: 10000rpm
The Fastest Rotation Speed: 15000rpm
Maximum Twisted Angle: 2.60x10rad (0.149°)
Moment of Inertia: 0.38kgcm
Vibration Natural Frequency(rotor Part): 19.4kHz
Torsion Constant: 3.85x10Nm / rad


Package List:

1 x Sensor 

1 x Line 


Note:

New‑style and old‑style are shipped randomly

Jeanoko Motor Sensor 0.5N.M DYN-200 OLED Display for Torsion For