$30 Ball bearing S693ZZ Miniature Deep Groove Ball Bearing (10PCS) A Industrial Scientific Power Transmission Products Bearings Miniature,S693ZZ,(10PCS),bearing,Deep,A,Ball,Bearing,Ball,Industrial Scientific , Power Transmission Products , Bearings,Groove,/incrassated1461684.html,$30,www.gimnesia.net $30 Ball bearing S693ZZ Miniature Deep Groove Ball Bearing (10PCS) A Industrial Scientific Power Transmission Products Bearings Ball bearing S693ZZ Miniature Max 51% OFF Deep Groove A Bearing 10PCS Miniature,S693ZZ,(10PCS),bearing,Deep,A,Ball,Bearing,Ball,Industrial Scientific , Power Transmission Products , Bearings,Groove,/incrassated1461684.html,$30,www.gimnesia.net Ball bearing S693ZZ Miniature Max 51% OFF Deep Groove A Bearing 10PCS

Ranking TOP10 Ball bearing S693ZZ Miniature Max 51% OFF Deep Groove A Bearing 10PCS

Ball bearing S693ZZ Miniature Deep Groove Ball Bearing (10PCS) A

$30

Ball bearing S693ZZ Miniature Deep Groove Ball Bearing (10PCS) A

|||

Product description

WHY 440C STAINLESS steel?
Good corrosion resistance to water and many weak chemicals.
Corrosion resistance can be improved by passivation.
Good for temperatures up to 300°C.
Slightly softer than chrome steel so lower load ratings.
Will corrode in salt water or salt spray and poor resistance to acids/alkalis.
More expensive than chrome steel.
TECHNICAL SPECS
Item: S693ZZ
Structure: Deep Groove
Material: 440C Stainless Steel ( prefix "S" )
Bore Dia (d): 3 mm
Outer Dia (D): 8 mm
Width (B): 4 mm
Closures: Metal Shielded(ZZ)
Lubrication: Grease
Magnetic: little
Hardness: 58HRC
Corrosion Resistance: General
Clearance: C0
Grades: ABEC Grades 1
Dynamic Load Rating (Cr) (Newtons): 474
Static Load Rating (Cor) (Newtons): 144
Ball Qty: 6
Ball Dia (Dw): 0.800 mm
Weight: 1.588 g
Quantity: 1 Lot = 10 PCS
What is 440C?
A martensitic stainless steel. It's composed of these major alloy elements (I don't list the minor elements since they don't play a major role):
Carbon: 0.95-1.25% This increases hardenability and wear resistance, but decreases toughness in higher amounts.
Manganese: 45% This is added to reduce brittleness and improve forgeability, hardenability, and reducing deformation.
Silicon: 30% This is a deoxidizer and improves hot-forming properties.
Chromium: 17.00-18.00% Added only to high alloy tool steels, this improves hardenability, high wear resistance, toughness, and corrosion resistance.
Molybdenum: 50% Improves deep hardening and toughness.
These basic elements (along with iron) are a simple combination that works well together, and has for many decades.
This alloy is technically classified as UNS (Unified Numbering System) S44044. It's also classified as SAE (Society for Automotive Engineers) as 51440C."br"The American Iron and Steel Institute classifies it as 440C martensitic st

Ball bearing S693ZZ Miniature Deep Groove Ball Bearing (10PCS) A

Newly released titles  
Back issues
Newly released issues  
Back issues
Most viewed articles (Aug.2021)
feedback
Top